Search results

The purpose of this paper is to study the introduction of 3D-printing of concrete in the construction sector.

A survey was conducted to collect professional view on ongoing innovations in the construction sector, including 3D-printing. Participants were selected among the members of Norwegian networks for project and construction management research.

The survey highlighted effective leadership, collaboration with partners and industry-academia collaboration as primary enablers of innovation. Few of the respondents to the survey have used 3D-printing technologies.

It is difficult to obtain representative samples in this type of research, including this study. The study can be seen as a snapshot of attitudes in the sector.

3D-printing appear as a potentially interesting technology, especially for unstandardized construction components. Further work is needed to materialise the expectation for technological development in the construction sector.

Most research on 3D-printing has focused on demonstrating technical potential. This study adds a practitioners’ perspective, with a large dose of pragmatism.

Lower Indus Basin (LIB) region is the food basket of Pakistan, and climatic variation in response to global warming might severely affect the crop production and, thus, food security and ultimately to the economy of the country.

The authors analyzed the previous climatic factors data series of LIB region to investigate the past and present climatic trends and to predict the future changes. Climatic changes were monitored by studying temperature, rainfall and relative humidity (RH) dynamics at two locations (Lahore and Multan) of the LIB region, Pakistan, by using data from 1953 to 2006. The data were divided into two equal halves (1953-1979 and 1980-2006) and statistically compared for the aforementioned weather parameters.

The results suggested that mean minimum temperature (MMT) and overall mean temperature in winter were significantly increased, whereas few summer months had also experienced the reduction in both temperatures. However, few minor changes were also observed for the mean maximum temperature at both locations. The rainfall amount did not vary significantly at both locations, with the exception for the months of February and June at Lahore location, which experienced relatively higher rainfall in latter period (1980-2006). However, morning and evening RH was significantly increased at Multan throughout the year and for some selected months (February-March and May-July) at Lahore. However, the comparison of climatic data of both temporal halves suggested either dryer weather during winter months because of increase in MMT and/or increase in area under irrigated agriculture, resulting in more evaporation at both locations. Similarly, the data also indicated the early monsoon rainfall patterns in summer and late western depression rainfall spell during winter, which played key role to affect the crop yield because of irregular rain events.

The current manuscript would be very useful for the disaster management authorities and agriculture sector to predict the future irregular trends of climate change in Pakistan. Moreover, current findings can be important tool toward the management of climatic changes issues (i.e. floods and dryer spells) and to formulate the future strategies for the improved crop growth in arid and/or semi-arid developing nations such as Pakistan.

The current manuscript, for the very first time, provided detailed insights into key climatic factors changes for past seven decades, into the severely climate change-affected areas of the world. Furthermore, agricultural sector is likely to be severely affected because of minor seasonal change in temperature and moisture, and have a strong food security impact, which can be reflected with current data set to cope with both ecological and economic impacts of climate change in Pakistan. The current findings would be useful to manage the climate change-related issues in Pakistan, including the social, environmental and economic.

This paper examines the profitability and performance measurement of U.S. regional banks during the period 1994–2011, using the GMM estimator technique. Our study extends prior research by including several factors not previously considered using U.S. data.

We use bank-specific, industry-specific, and macroeconomic determinants of profitability contemporaneous with our performance indicators. We follow the accounting fundamental analysis path in explaining the bank performance.

Among the performance measures, the efficiency ratio and provisions for credit losses are negatively and equity scaled by assets is positively related to profitability. However, these relationships either reverse (efficiency ratio and provisions for credit losses) or become insignificant (equity scaled by assets) when the target becomes change in profitability. The level of nonperforming assets is negatively related to profitability across all measures of profitability used. Macroeconomic variables are largely unrelated to profitability during the year they are measured. However, they have a significant relationship with earnings change measures, suggesting they have a lagged effect on profitability. The slope of the yield curve is especially strong in this regard.

We use our determinants to model changes in bank profitability one year ahead, in addition to including several factors not previously considered, using the predictive focus of the fundamental analysis research.

Fluorocarbon (FC) gas, which contributes to the ozone depletion and global warming, is commonly used especially in the refrigeration and air conditioning (RAC) equipment. In Malaysia, lifecycle management of FC gas is still lacking at all stages, especially at the downstream level (maintenance, service, recycle, recovery, and destruction). Thus, the aim of this study is to assess the level of awareness of local stakeholders and consumers regarding FC gas management. Furthermore, the level of awareness among the consumers has been identified based on their educational background. Two sets of questionnaires were developed based on the dichotomous question types (yes/no) and were distributed to local stakeholders and consumers by using convenience sampling in two different programmes. The data were statistically analysed using IBM SPSS software. Findings demonstrate that, in contrast to consumers, local stakeholders have high level of awareness in every section. Remarkably, all non-engineering respondents have a low level of awareness about FC gas management. As a result, capacity building for consumers and service maintenance personnel who are heavily involved in middle steam and downstream lifecycle FC gas management is needed.

Open innovation has attracted the attention of experts and business entities for the sustainable survivability of firms, especially in the post-COVID-19 era. The food and beverage industry has been facing sustainable survivability problems. It is important to identify and evaluate the factors of open innovation from the perspectives of the food and beverage industry. This study serves that purpose by identifying and evaluating the factors of open innovation in the post-COVID-19 era with a special reference to Pakistan's economy.

The present study integrates the Fuzzy Delphi Method (FDM), Interpretive Structural Modelling (ISM) and Matrice d’ Impacts Croises Multiplication Applique a Classement (MICMAC) methods to analyze the factors involved in the adoption of open innovation in the food and beverage industry in Pakistan. Firstly, based on an extensive literature review of the most relevant studies, the factors affecting open innovation have been identified and finalized using FDM and experts' opinions. Secondly, the hierarchical framework has also been prepared by implementing the ISM approach. Thirdly, the MICMAC approach was employed to evaluate the factors to examine the driving and dependence powers of the factors of open innovation adoption.

The study identified 17 factors of open innovation adoption in Pakistan's food and beverage industry and 16 factors were finalized using FDM. The ISM-MICMAC matrix unveiled that awareness seminars and training, along with a lack of executive commitments, were strong factors with high driving power, but these factors proved to be weakly dependent powers regarding the other factors. Moreover, a lack of innovation strategy, R&D and non-supportive organizational culture exhibited low driving power but strong dependent power.

The findings of the study could help firms and business entities understand the driving and dependent factors involved in open innovation for the sustainable survivability of the food and beverage industry. The study provides strong reasons to believe that an open innovation strategy, along with stakeholder collaboration, the adoption of rules and regulations and managerial commitment, could stimulate open innovation. Moreover, governments should promote the business sector, especially the food and beverage industry, to facilitate the sector while also providing awareness seminars and training, creating environments conducive to reducing innovation costs.

Some previous studies have analyzed the factors involved in green innovation from the perspective of the manufacturing industry and environmental protection. The present study is a pioneer study to examine the factors involved in the adoption of open innovation in the food and beverage industry in Pakistan from the perspective of the post-COVID-19 era. For this purpose, the present study uses an integrated Fuzzy Delphi-ISM-MICMAC approach for the analysis.

The purpose of this paper is to determine the mediating role of “moral clarity” and the moderating role of “hypocrisy” in the relationship between sense of power and punishment severity.

The data were collected using purposive sampling from 250 government officials serving at a responsible and authoritative position in different public sector organizations operating in Pakistan.

The study has found a significant indirect effect of sense of power on punishment severity through moral clarity. This study has also found that this indirect effect is significant at higher levels of hypocrisy but insignificant at lower or moderate level of hypocrisy.

The study offers serious practical implications by highlighting the role of hypocrisy in powerful individuals’ moral judgements and their decisions to exercise power and administer punishments.

The study is the first to develop and test a mediated-moderation model of the relationship between sense of power, moral clarity, hypocrisy and punishment severity.

The purpose of this paper is to illuminate enablers, barriers and vignettes of South Asian women leaders and possible paths to increase the influence and leadership of women in South Asia.

Navratna, the nine precious gems of ancient Indian literature are used to frame reflections on South Asian women leaders, and the Global Gender Gap Report of 2015 is used to give context to five barriers and five enablers to women’s leadership in the region. Illustrative vignettes of South Asian women in leadership roles are presented. These vignettes have been selected based on a case study approach of South Asian women leaders.

Five enablers that may help empower women towards greater leadership and influence are proposed: involving men in what should change, greater economic participation by women, supportive family, country- and context-specific leadership training, and finally grassroots advocacy, mentoring and role models.

The paper shines new light on women leaders whose sparking excellence in their specific field illuminate paths for others to follow and thus contributes to promoting research on multifaceted women leaders in South-Asia.

The prolonged army rule in the country has affected the policymaking procedure of the state. Specifically, defence and foreign policies of the country are normally decided by the armed forces of Pakistan as per their own priorities, which is against the norms of democratic culture and supremacy of the civilian rule.

The control of important decision-making process in the hands of the armed forces has generated an arms race in the subcontinent. The major portion of the national budget is being spent on the defence forces and other sectors such as education and health and social welfare are not getting their due share from the revenue of the country. The continued sense of insecurity and animosity with neighbour countries, especially India, has resulted in speeding the acquisition of sophisticated arms in the country.

This research discusses the effects of the military's role in the decision-making of the country and its impacts on the relations between India and Pakistan. The confidence building measures and peacemaking process in South Asia is dependent on the attitude of the military of both the countries.